title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200msp3t5b7m2reh 2:1 9/1/2011 ST211154 b bma 1 1 p.c. mounting 1 2 3 3 without locking ring with locking ring panel mounting 6.60 [.260 in] 8.13 [.320 in] 5.08 [.200 in] 25 ~ pos. 1 pos. 2 pos. 3 pos. 1 pos. 2 pos. 3 switch function off on on 2-3 open 2-1 a 20123 released for production 09/01/11 bma note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 0.4 va max. @ 20 vac or vdc 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 m min. 8. dielectric strength: 1,000 v rms @sea level. 9. contact resistance: 20m max. initial @2-4vdc 100ma for both silver and gold plated contacts. 10. operating temp.: -30c to 85c 11. hardware to be shipped bulk t100000 - hexnut - qty 2 t100011 - lockwasher - qty 1 t100015 - lockring - qty 1 12. 2002/95/ec (rohs) compliant 13. denotes critical parameter. e-logo on opposite side circuit: spdt 2 13 n 1.09 [.043 in] n 2.54 [.100 in] epoxy seal 2.54 [.100 in] 5.08 [.200 in] 6.86 [.270 in] 8.64 [.340 in] 3.30 [.130 in] .51 [.020 in] 2.54 [.100 in] 1/4-40 uns-2a .76 [.030 in] b 20335 correct terminal callouts 12/9/11 bgl b b 6.20 [.244 in] . 8 5 [ . 0 3 3 i n ] n 6.35 [.250 in] .55 [.022 in] n 6.35 [.250 in] n 2.38 [.094 in] 6.10 [.240 in]
|